INTRODUCING  PICOMIC 2

 

THE SMALLEST WIRELESS MICROPHONE

FOR PROFESSIONALS WHO NEED THE BEST.

Unmatched performance.

20 h 
Battery life

HD audio
24-bits – 48kHz

200+ m
Outdoor range

FORGET CLUNKY WIRELESS SYSTEMS

JUST CLIP & GO!

The PicoMic 2 is the smallest wireless microphone on the market.
And it doesn’t make any compromise on performance.

ADVANCED AUDIO RECEIVER

Super-easy to use with a large LCD screen and clear menus.

BEST ON BATTERY LIFE

On a single charge.
+ EXCLUSIVE FEATURE

REMOTE POWER-ON

Leave the PicoMic 2 on your talent all day.

The PicoMic 2 wakes-up remotely when you connect to it.
No need to switch it on!

P4110861-2.png

BEST ON AUDIO QUALITY

We match the best & expensive
Lavalier microphones on the market.

Outperforming all other wireless systems built-in microphones.

+ EXCLUSIVE FEATURE

AUDIO LIMITER

A feature normally found on ultra high-end wireless systems only.

An ultra-fast DSP algorithm constantly monitors the audio level and adjusts the microphone gain sample-per-sample when the microphone may saturate - with no audible artifacts!
It will save your recording when loud sounds saturate the microphone!

EXTERNAL MICROPHONE SUPPORT

Enjoy the PicoMic wireless system with any microphone,
or external audio sources.

PRO version only

LEADING WIRELESS TECHNOLOGY 

WAV/SYNC is PicoGear’s game-changing wireless technology, made for professional audio.

ULTRA-FAST CONNECTION

WAV/SYNC connection is made automatically when the PicoMic is removed from the receiver, and the connection time is <2s. 

MULTI-MICROPHONE SUPPORT

WAV/SYNC allows multiple microphones to be connected at the same time and guarantees an audio synchronization between the microphones <1µs.

ADAPTATIVE 200m / 600ft RANGE

WAV/SYNC determines the distance between the devices and dynamically updates the radio power up to 50mW, allowing a line-of-sight range of up to 200m and top-notch coexistance with other wireless devices. 

WIFI DETECT & AVOID

WAV/SYNC automatically scans the 2.4GHz band, detects the type of signal, and do not use channels that are used by nearby Wi-Fi or Bluetooth devices, providing a rock-solid link even in dense Wi-Fi environments.

BI-DIRECTIONAL LINK

WAV/SYNC uses a fully bi-directional link, providing advanced remote control of the microphone from the receiver (gain, mute, noise reduction), and a feedback from the microphone (battery level, link quality, etc).

SPECIFICATIONS

PICOMIC 2 WIRELESS MICROPHONE

Dimensions1.7″ x 0.7″ x 0.28″
43mm x 17mm x 7mm
Weight8.0g
Microphone typeOmni-directional digital microphone
Audio sampling24-bits @ 48kHz
AF frequency response20Hz – 20000Hz (after high-pass filter)
Max. audio level130dB SPL
Battery life20h (<10m distance)
10h (worst-case @ 200m)
Full charge timeApprox. 1h
Selectable gain-18dB to +12dB in 3dB steps
Audio limiterThreshold: -6dB
Attack time: 1ms
Release time: 200ms
External mic
(PRO version only)
Plug-in power: 3.3V @ 4.7kohms
Input type: MIC or LINE IN (depending on selected gain)
Selectable gain: -18dB to +12dB in 3dB steps
Hybrid analog + digital audio limiter
Enabled by: mic auto-detection or manual mode
Wireless systemWAV/SYNC PicoGear System
2.4GHz worldwide license-free band
Adaptative high-speed frequency hopping with Wi-Fi and Bluetooth avoidance
RF powerAuto-adaptative – up to 50mW (long-range version)
Audio latency< 1 frame @ 60FPS
Inter-mic latency< 1µs
Provided with1x Clip-on custom windshield
1x User manual
2x 3.5mm TRS to PicoMic cable (PRO version only)

PICOSTREAM WIRELESS RECEIVER

Dimensions4.5″ x 2.4″ x 0.7″
115mm x 61mm x 17mm
Weight110g
Power sourceInternal battery
External supply with micro-USB / power-bank compatible
Full charge timeApprox. 2h
Battery life20h – 30h (depending on number of devices connected)
Audio output typesAudio 3.5mm jack – TRS + TRRS modes
Audio output impedance220 ohms
Audio output modesTRRS mode
L channel: MIC1 – MIC2 – MIC1+2 – NONE
R channel: MIC1 – MIC2 – MIC1+2 – NONE
TRS mode 
Mono channel: MIC1 – MIC2 – MIC1+2 – NONE
Audio output gain-24dB to +24dB in 3dB steps
Headphones output3.5mm jack audio output
Supported impedance: any between 10ohms and 100ohms
VU-meter displayRMS and PEAK values between -40dB and 0dB
Display2.4″ high-contrast IPS display
Provided with1x TRRS to TRRS cable (working with TRS as well)
1x USB cable
1x Flash grip mount (360° ball head version)
1x Quick-start guide
1x High-quality rigid travel case

GET YOURS NOW!

Previous
Next

PicoMic Wireless Kit

1 PicoStream receiver
2 PicoMic microphones
+ 2 Clip-on windshields
+ Transport case
+ TRS + TRRS cable
+ Hot-shoe mount adapter
+ Quick-start Guide

$ 359  + Free US shipping